Product Data Sheet
Product Catalog Number: Sicrys™ I20DM-206
General Information
Sicrys™ I20DM-206, a conductive ink based on single-crystal silver nanoparticles in diethylene glycol monomethyl ether (DGME), is designed for digital inkjet printing, for use with printheads that require low viscosity inks, like Epson printheads. The ink offers low viscosity, long shelf life, storage at ambient conditions, robust jetting and good printability. Printed patterns, sinterable at low temperatures, provide low electrical resistivity and good adhesion to a range of substrates.
Sicrys™ I20DM-206, a conductive ink based on single-crystal silver nanoparticles in diethylene glycol monomethyl ether (DGME), is designed for digital inkjet printing, for use with printheads that require low viscosity inks, like Epson printheads. The ink offers low viscosity, long shelf life, storage at ambient conditions, robust jetting and good printability. Printed patterns, sinterable at low temperatures, provide low electrical resistivity and good adhesion to a range of substrates.
Ink Properties
|
Electrical and Adhesion Properties
Sintering Conditions (on PEN)
180ºC/30 min 150ºC/30 min Sheet Resistance(180°C/30 min) 10 mΩ/square 12 mΩ/square Adhesion (not limited) to: ITO, Glass. (ISO-2409, no cuts) Compatible printheads*
Ink works well, among others, with printheads
Epson |
Resistivity (4PP)
≤10 µΩ·cm (≤6.3 bulk) ≤12 µΩ·cm (≤7.5 bulk) Layer Thickness 10 μm 10 μm |
* Printheads listed here were tested and perform well. Other compatible printheads may also be applicable.